Chapter 3: Preparing the AID 2.0 disc on your PC
The first step is to unrar the archive that you have downloaded; to do this you will need a program such as 7-Zip or WinRAR to do so. DO NOT try and burn the RAR file on to a CD / DVD as it will not work.
Using the AID 2.0 ISO Updater Program
 Now, before you burn the ISO you may want to add some additional extras to Auto-Installer Deluxe 2, like for example a translation pack or a dummy file pack (which will basically insert either a 100mb or 1gb dummy file at the start of the ISO).
This is the first screen you will see on the update tool. Your first job is to select the AID 2 ISO file (highlighted green in the screenshot to the right).
After selecting the ISO you need to select the update file (highlighted green in the top section of the screenshot to the left). You'll see down at the bottom of the status screen the files that have been loaded. You can clear the selected updates using the "Clear filelist" button highlighted in blue. Once you're done selecting the updates, click on the Save ISO button highlighted in red. After you select the location and filename of the ISO it'll start.
 Once the new image has been made you will see this popup window (shown on the right). This confirms that the ISO has been created and is now ready for burning.
Burning the ISO with DVD Decrypter
This is a free program, which can be obtained from here: http://www.dvddecrypter.com
This is how to burn the ISO file with DVD Decrypter. Before proceeding, make sure you have an updated version of DVD Decrypter (3.5.1.0 or higher).
Firstly, open DVD Decrypter, then press the W button. This is a shortcut to the ISO Writing Screen. Alternatively you can go to Tools, Select ISO, and then Write on the submenu box that the menu pops up. When this screen appears you can either browse for your ISO file, or just drag and drop it into the window. Now, before proceeding (which is click on the HDD to DVD icon) make sure you have the verify box ticked and the Write Speed set at a low speed, to ensure that is burned properly.
Once this is all done you can proceed to burn your CD-RW / DVD. If you start receiving write errors while burning, try a lower writing speed.
Burning the ISO with Nero Burning Rom
This program offers a free trial, but after a certain amount of days you must buy the program. It can be obtained from here: http://www.nero.com/en/nero-prog.php
Open Nero Burning Rom, and select the burner you wish to use. Then, select File, then Open. You will see the following screen:
Please make sure that the Finalize DVD box is ticked, and that you have selected a proper write speed (remember, the slower the speed the more chance of a successful burn). After this is all set, click the Burn button, and it will start burning the ISO.
|
|
|
Manuals 
Guests: 77 | 
Members: 3
